Trigger data

The model data that will trigger (start) this automation.

Properties

Data path

Run the automation action when configuration or status data changes.

• Data type: string
• Default: /network/cellular/signal/level
• Configuration
• Optional

CLI: (cli)> config network cellular signal led data path

Include data subpaths

Filter the data to include the listed subpaths.

• Data type: string list
• Configuration

CLI: (cli)> config network cellular signal led data include

Exclude data subpaths

Filter the data to exclude the listed subpaths.

• Data type: string list
• Configuration

CLI: (cli)> config network cellular signal led data exclude