Tailscale

Connect to your Tailscale network.

Properties

Enable

Enable the Tailscale client.

  • Data type: boolean
  • Default: false
  • Configuration

CLI: (cli)> config vpn tailscale enable

Connected

A field set when the device is connected to the Tailscale network.

OptionLabel
trueConnected
falseNot connected
  • Data type: boolean
  • Status

CLI: (cli)> show vpn tailscale connected

IPv4 address

The IPv4 address of this device on the Tailscale network.

  • Data type: string
  • Status

CLI: (cli)> show vpn tailscale ipv4-address

IPv6 address

The IPv6 address of this device on the Tailscale network.

  • Data type: string
  • Status

CLI: (cli)> show vpn tailscale ipv6-address

Status

The status of the Tailscale client.

  • Data type: string
  • Status

CLI: (cli)> show vpn tailscale status

Authentication key

See https://tailscale.com/kb/1085/auth-keys/ for details.

  • Data type: string
  • Configuration
  • Optional

CLI: (cli)> config vpn tailscale auth-key

Advertise network routes to peers.

  • Data type: reference list
  • Configuration

CLI: (cli)> config vpn tailscale advertise-route