Accessing the device

The device's default configuration allows logging in to the device with the following credentials:

• Username: admin
• Password: see unique password on device label

Additionally, if the device is connected to the internet and can access Gearlinx ZERO, a user permitted to access the device via ZERO can log in locally with their ZERO credentials.

Network services

Network services are accessible on the device's internal network interfaces. The device's hostname is set as its serial number, and the device's IP address can be resolved with mDNS. For example, NR4448-0000123456789.local.

The following network services are available:

• SSH to the device at <serial>.local.
• Enter https://<serial>.local in your browser to access the web interface.
• Access the device's web interface via Gearlinx ZERO.

Serial console

The device's serial port labelled Console runs a login. Connect to the serial port with settings 115200 / 8N1.

Resource menu

After logging in to the device over a terminal interface such as SSH or the serial console, you will be presented with the resource menu.

The resource menu shows the textual resources that the authenticated user is given access to, such as serial ports and system logs. The CLI is available to users with the Administration permission under the option System / CLI.

When accessing the web interface, the resource menu can be found under the Connect menu in the page header. Users with the Administration permission will find the Administration menu on the navigation bar on the left of the page. This menu provides access to the same configuration, status, and command functionality as the CLI.