Remote Power Controllers (RPC)s
Monitor/Operate RPCs.
New Remote Power Controller (RPC) items can be added.
Remote Power Controller (RPC)
- Outlets - A list of outlets provided by the RPC.
Properties
Enable
Enable the RPC for use.
- Data type: boolean
- Default:
true - Configuration
CLI: (cli)> config power rpc connection <key> enable
Label
The label used to describe this RPC.
Whenever this RPC is displayed, the label will be used
- Data type: string
- Configuration
- Optional
CLI: (cli)> config power rpc connection <key> label
RPC type
The type of RPC being connected to
- Data type: reference path
- References instances of: Power / Remote Power Controllers (RPCs) / definition
- Configuration
- Required
CLI: (cli)> config power rpc connection <key> definition
Serial port for serial RPC connection
The device serial port connected to the RPC.
- Data type: reference path
- References instances of: Serial ports
- Configuration
- Required
CLI: (cli)> config power rpc connection <key> serial
Network address for SNMP/HTTP RPC connection
The IP address/hostname assigned to the RPC.
| Format | Description |
|---|---|
| Domain name | A domain or subdomain name containing letters, digits, hyphens (-), and periods (.). The domain name must start and end with a letter or digit. |
| IPv4 host address | An IPv4 host address in dotted-quad notation. |
- Data type: string
- Configuration
- Required
CLI: (cli)> config power rpc connection <key> network