Automation

Automations provide a method to automate tasks and action.

• Trigger data - The model data that will trigger (start) this automation.

Commands

• Start - Start this automation.
• Stop - Stop this automation.

Properties

Enable

Enable this automation.

• Data type: boolean
• Default: true
• Configuration

CLI: (cli)> config network vlan <key> ipv4 dhcp-client-link-local-fallback enable

Label

The label used to describe and locate this automation.

• Data type: string
• Default: DHCP client / link-local address fallback
• Configuration
• Optional

CLI: (cli)> config network vlan <key> ipv4 dhcp-client-link-local-fallback label

Running

The run status of this automation.

• Data type: boolean
• Status

CLI: (cli)> show network vlan <key> ipv4 dhcp-client-link-local-fallback running

Error

The error associated with the recent failed run.

• Data type: string
• Status

CLI: (cli)> show network vlan <key> ipv4 dhcp-client-link-local-fallback error

Script

The javascript automation source.

• Data type: string
• Default: if (data.mode === 'client') { const enable = !data.client.lease.address; console.log(${enable ? 'Enabling' : 'Disabling'} IPv4 link-local address) await model.push('../link-local/enable', enable); }
• Configuration
• Required

CLI: (cli)> config network vlan <key> ipv4 dhcp-client-link-local-fallback script

Run schedule

Run the automation action on a schedule.

• Data type: string
• Configuration
• Optional

CLI: (cli)> config network vlan <key> ipv4 dhcp-client-link-local-fallback schedule

Run on start

Run the automation action immediately after boot up or the automation is added.

• Data type: boolean
• Default: true
• Configuration

CLI: (cli)> config network vlan <key> ipv4 dhcp-client-link-local-fallback run-on-start