Stored configurations
Named configurations that can be applied to the device.
Save the current device configuration to the store by running the Save to configuration store command.
Stored configuration items are status and cannot be added or deleted.
Stored configuration
A stored configuration than can be applied to the device.
Commands
Properties
Notes
Notes that describe the configuration, written when the configuration is saved.
- Data type: string
- Status
CLI: (cli)> show system config store <key> notes
Firmware version
The firmware version that the configuration applies to.
The configuration can be applied to the device when it is running any firmware version, but may not be valid on all firmware and will fail to apply.
- Data type: string
- Status
CLI: (cli)> show system config store <key> firmware-version
Saved at
The time that the configuration was saved to the store.
- Data type: integer
- Units: seconds since epoch
- Status
CLI: (cli)> show system config store <key> saved-at