Modify packet on output

Make changes to packets on output.

Packet modification is applied to forwarded traffic after the rule has matched. Use source NAT for masquerade-style policies and destination NAT for port-forward or service redirection policies.

• Source NAT - Apply SNAT changes to packet on output.
• Destination NAT - Apply DNAT changes to packet on output.

Properties

Set DSCP

Modify the Differentiated Services Code Point (DSCP) in forwarded packets.

• Data type: integer
• Minimum: 0
• Maximum: 63
• Configuration
• Optional

CLI: (cli)> config network flow rule <key> modify dscp