Access control list

The set of interfaces that the service is accessible from.

Set both Interfaces and Zones to empty to remove interface restrictions.

Properties

Interfaces

Allow the service to be accessed over interfaces in this list.

Requests are allowed only when they arrive on one of these interfaces, unless a matching zone is also configured.

• Data type: reference list
• Configuration

CLI: (cli)> config service telnet acl interface

Zones

Allow the service to be accessed over interfaces in the zones in this list.

Requests are allowed when they arrive on any interface that belongs to one of these zones.

• Data type: reference list
• Configuration

CLI: (cli)> config service telnet acl zone