Syslog server

Collect syslog messages sent from remote hosts and print them to the system log.

• Access control list - The set of interfaces that the service is accessible from.

Properties

Enable

Enable the syslog server.

• Data type: boolean
• Default: false
• Configuration

CLI: (cli)> config service syslog enable

Port

The network port that the syslog server listens on.

The syslog server will accept log messages sent over TCP connections and UDP packets.

• Data type: integer
• Default: 514
• Minimum: 1
• Maximum: 65535
• Configuration
• Required

CLI: (cli)> config service syslog port