Email (SMTP)
Send email using the SMTP protocol.
Commands
- Send Test email - Send a test email immediately.
Properties
Enable
Enable the email sender.
- Data type: boolean
- Default:
false - Configuration
CLI: (cli)> config system notification email enable
SMTP Server
The SMTP server that will receive the email.
- Data type: string
- Default:
smtp.example.com - Configuration
- Required
CLI: (cli)> config system notification email server
SMTP Port
The SMTP port the server is listening on.
- Data type: integer
- Default:
587 - Minimum: 1
- Maximum: 65535
- Configuration
- Required
CLI: (cli)> config system notification email port
SMTP Connection Protocol
The protocol required to connect to the SMTP server.
| Option | Label | Description |
|---|---|---|
unencrypted | Unencrypted | Plain text SMTP with no encryption. |
starttls | StartTLS | Start the connection using TLS and fallback to unencrypted if that fails. |
tls | TLS Only | Require the connection to use TLS encryption. |
- Data type: string select
- Default:
starttls - Configuration
- Required
CLI: (cli)> config system notification email protocol
Sender Address
The email address messages will be sent from.
- Data type: string
- Default:
user@example.com - Configuration
- Required
CLI: (cli)> config system notification email sender
Username
The username required to authenticate the connection.
- Data type: string
- Configuration
- Optional
CLI: (cli)> config system notification email username
Password
The password required to authenticate the connection.
- Data type: string
- Configuration
- Optional
CLI: (cli)> config system notification email password