Telnet

Allow direct connection to the serial port using telnet.

Access the serial port with telnet using a command similar to:

telnet <ip address of device> <port>

Use the telnet escape character to control the session (traditionally ^[).

• Access control list

Properties

Enable

Enable the network service.

• Data type: boolean
• Default: false
• Configuration

CLI: (cli)> config serial <key> access telnet enable

Port

The IP port the service operates on.

• Data type: integer
• Minimum: 1
• Maximum: 65535
• Configuration
• Optional

CLI: (cli)> config serial <key> access telnet port