Introduction
Accessing the device
CLI
Administration reference
1.
Serial ports
❱
1.1.
TCP
1.2.
Communications settings
1.3.
Signals
1.4.
Statistics
1.5.
Direct access
❱
1.5.1.
SSH
❱
1.5.1.1.
Access control list
1.5.2.
Telnet
❱
1.5.2.1.
Access control list
1.6.
Logging
❱
1.6.1.
File based log settings
1.6.2.
Syslog
1.7.
Connected users
2.
Storage
❱
2.1.
Volumes
❱
2.1.1.
Volume size
2.2.
Disks
❱
2.2.1.
Match disk
2.2.2.
Match partition
2.2.3.
Disk size
2.3.
Downloads
❱
2.3.1.
Download progress
3.
Network
❱
3.1.
Cellular
❱
3.1.1.
Connections
❱
3.1.1.1.
APNs
3.1.1.2.
IPv4
❱
3.1.1.2.1.
DNS servers
3.1.1.3.
IPv6
❱
3.1.1.3.1.
Network prefix
3.1.1.3.2.
DNS servers
3.1.1.4.
Interface
❱
3.1.1.4.1.
Statistics
3.1.1.4.2.
Connectivity testing
❱
3.1.1.4.2.1.
Tests
❱
3.1.1.4.2.1.1.
Ping test
3.1.1.4.2.1.2.
HTTP/HTTPS/FTP file fetch test
3.1.1.4.2.1.3.
DNS test
3.1.1.4.2.2.
Run tests
3.1.2.
Signal
❱
3.1.2.1.
Automation
❱
3.1.2.1.1.
Trigger data
3.1.2.1.2.
Start
3.1.2.1.3.
Stop
3.1.3.
Network
❱
3.1.3.1.
4G network
3.1.3.2.
3G network
3.1.3.3.
Automation
❱
3.1.3.3.1.
Trigger data
3.1.3.3.2.
Start
3.1.3.3.3.
Stop
3.1.4.
SIM
❱
3.1.4.1.
SIM1
3.1.4.2.
SIM2
3.1.4.3.
Failover
❱
3.1.4.3.1.
Trigger data
3.1.4.3.2.
Start
3.1.4.3.3.
Stop
3.1.4.4.
Switch SIM slot
3.1.5.
Details
3.2.
Ethernet
❱
3.2.1.
Interface
❱
3.2.1.1.
Statistics
3.2.1.2.
Connectivity testing
❱
3.2.1.2.1.
Tests
❱
3.2.1.2.1.1.
Ping test
3.2.1.2.1.2.
HTTP/HTTPS/FTP file fetch test
3.2.1.2.1.3.
DNS test
3.2.1.2.2.
Run tests
3.2.2.
IPv4
❱
3.2.2.1.
Static IP addresses
3.2.2.2.
Static routes
3.2.2.3.
DHCP
❱
3.2.2.3.1.
DHCP client
❱
3.2.2.3.1.1.
Lease
❱
3.2.2.3.1.1.1.
DNS servers
3.2.2.3.1.1.2.
NTP servers
3.2.2.3.2.
DHCP server
❱
3.2.2.3.2.1.
Lease pool
3.2.2.3.2.2.
Static leases
3.2.2.3.2.3.
Active leases
3.2.2.3.2.4.
DHCP options
❱
3.2.2.3.2.4.1.
DNS servers
3.2.2.3.2.4.2.
NTP servers
3.2.2.3.2.4.3.
WINS servers
3.2.2.3.2.4.4.
BOOT File
3.2.2.3.2.4.5.
Custom DHCP options
3.2.2.3.3.
DHCP relay
3.2.2.3.4.
Passthrough
3.2.2.4.
Link-local address
3.2.2.5.
Automation
❱
3.2.2.5.1.
Trigger data
3.2.2.5.2.
Start
3.2.2.5.3.
Stop
3.2.3.
IPv6
❱
3.2.3.1.
Static IP addresses
3.2.3.2.
Prefix assignments
3.2.3.3.
Static routes
3.2.3.4.
SLAAC/DHCPv6 client
❱
3.2.3.4.1.
IPv6 addresses
3.2.3.4.2.
Request prefix delegation
3.2.3.4.3.
DNS servers
3.2.3.4.4.
Routes
3.2.3.4.5.
NTP servers
3.2.3.5.
RA/DHCPv6 server
❱
3.2.3.5.1.
DHCPv6 options
❱
3.2.3.5.1.1.
DNS servers
3.2.3.5.1.2.
NTP servers
3.2.3.5.1.3.
Custom DHCP options
3.3.
VLANs
❱
3.3.1.
Interface
❱
3.3.1.1.
Statistics
3.3.1.2.
Connectivity testing
❱
3.3.1.2.1.
Tests
❱
3.3.1.2.1.1.
Ping test
3.3.1.2.1.2.
HTTP/HTTPS/FTP file fetch test
3.3.1.2.1.3.
DNS test
3.3.1.2.2.
Run tests
3.3.2.
IPv4
❱
3.3.2.1.
Static IP addresses
3.3.2.2.
Static routes
3.3.2.3.
DHCP
❱
3.3.2.3.1.
DHCP client
❱
3.3.2.3.1.1.
Lease
❱
3.3.2.3.1.1.1.
DNS servers
3.3.2.3.1.1.2.
NTP servers
3.3.2.3.2.
DHCP server
❱
3.3.2.3.2.1.
Lease pool
3.3.2.3.2.2.
Static leases
3.3.2.3.2.3.
Active leases
3.3.2.3.2.4.
DHCP options
❱
3.3.2.3.2.4.1.
DNS servers
3.3.2.3.2.4.2.
NTP servers
3.3.2.3.2.4.3.
WINS servers
3.3.2.3.2.4.4.
BOOT File
3.3.2.3.2.4.5.
Custom DHCP options
3.3.2.3.3.
DHCP relay
3.3.2.3.4.
Passthrough
3.3.2.4.
Link-local address
3.3.2.5.
Automation
❱
3.3.2.5.1.
Trigger data
3.3.2.5.2.
Start
3.3.2.5.3.
Stop
3.3.3.
IPv6
❱
3.3.3.1.
Static IP addresses
3.3.3.2.
Prefix assignments
3.3.3.3.
Static routes
3.3.3.4.
SLAAC/DHCPv6 client
❱
3.3.3.4.1.
IPv6 addresses
3.3.3.4.2.
Request prefix delegation
3.3.3.4.3.
DNS servers
3.3.3.4.4.
Routes
3.3.3.4.5.
NTP servers
3.3.3.5.
RA/DHCPv6 server
❱
3.3.3.5.1.
DHCPv6 options
❱
3.3.3.5.1.1.
DNS servers
3.3.3.5.1.2.
NTP servers
3.3.3.5.1.3.
Custom DHCP options
3.4.
Flow
❱
3.4.1.
Rules
❱
3.4.1.1.
Rejection
3.4.1.2.
Input matches
3.4.1.3.
Filter packets
❱
3.4.1.3.1.
ICMP
3.4.1.3.2.
ICMPv6
3.4.1.3.3.
Source
❱
3.4.1.3.3.1.
Source address
3.4.1.3.4.
Destination
❱
3.4.1.3.4.1.
Destination address
3.4.1.4.
Output interfaces
3.4.1.5.
Modify packet on output
❱
3.4.1.5.1.
Source NAT
❱
3.4.1.5.1.1.
Source address
3.4.1.5.2.
Destination NAT
❱
3.4.1.5.2.1.
Destination address
3.4.2.
Zones
4.
VPN
❱
4.1.
Wireguard
❱
4.1.1.
Tunnel addresses
4.1.2.
Interface
❱
4.1.2.1.
Statistics
4.1.2.2.
Connectivity testing
❱
4.1.2.2.1.
Tests
❱
4.1.2.2.1.1.
Ping test
4.1.2.2.1.2.
HTTP/HTTPS/FTP file fetch test
4.1.2.2.1.3.
DNS test
4.1.2.2.2.
Run tests
4.1.3.
Peers
❱
4.1.3.1.
Routes
4.1.4.
Access control list
5.
Monitoring
❱
5.1.
SNMP
❱
5.1.1.
SNMPv1/v2c configuration
5.1.2.
SNMPv3 configuration
❱
5.1.2.1.
SNMPv3 authentication user
5.1.3.
Access control list
6.
Services
❱
6.1.
Web interface
❱
6.1.1.
Access control list
6.1.2.
Unencrypted redirect
❱
6.1.2.1.
Access control list
6.2.
SSH
❱
6.2.1.
Access control list
6.3.
TFTP
❱
6.3.1.
Access control list
6.4.
DNS
❱
6.4.1.
Access control list
6.5.
mDNS
❱
6.5.1.
Access control list
6.6.
Syslog server
❱
6.6.1.
Access control list
6.7.
QXDM
❱
6.7.1.
Access control list
7.
Alerting
❱
7.1.
Serial port alerts
❱
7.1.1.
Alert options
7.1.2.
Action options
❱
7.1.2.1.
Email
7.1.2.2.
SNMP trap
7.1.2.3.
HTTP(S)
7.1.3.
Automation
❱
7.1.3.1.
Trigger data
7.1.3.2.
Start
7.1.3.3.
Stop
7.2.
Network interface alerts
❱
7.2.1.
Action options
❱
7.2.1.1.
Email
7.2.1.2.
SNMP trap
7.2.1.3.
HTTP(S)
7.2.2.
Automation
❱
7.2.2.1.
Trigger data
7.2.2.2.
Start
7.2.2.3.
Stop
8.
Automation
❱
8.1.
Trigger data
8.2.
Start
8.3.
Stop
9.
Authentication
❱
9.1.
Users
9.2.
Groups
❱
9.2.1.
Resource rules
9.3.
Authentication methods
❱
9.3.1.
RADIUS
❱
9.3.1.1.
Servers
9.3.2.
TACACS+
❱
9.3.2.1.
Servers
9.3.3.
LDAP
❱
9.3.3.1.
Servers
9.4.
Sessions
❱
9.4.1.
Active sessions
❱
9.4.1.1.
Kick session
9.5.
Resources
10.
System
❱
10.1.
Operations
❱
10.1.1.
Restart
10.1.2.
Backup system to file
❱
10.1.2.1.
contents
10.1.3.
Restore system from backup file
10.1.4.
Restore to factory defaults
10.1.5.
Generate support report
10.2.
Configuration
❱
10.2.1.
Stored configurations
❱
10.2.1.1.
Apply
10.2.1.2.
Delete
10.2.2.
Save configuration
10.2.3.
Apply saved configuration
10.2.4.
Delete configuration
10.2.5.
Save to configuration store
10.3.
Information
10.4.
Firmware
❱
10.4.1.
Modem FOTA
❱
10.4.1.1.
Download
❱
10.4.1.1.1.
Download progress
10.4.2.
Update firmware
10.5.
Sensors
10.6.
Logs
❱
10.6.1.
Log to filesystem
10.6.2.
Log to remote servers
10.7.
Plugins
10.8.
Time
❱
10.8.1.
NTP client
❱
10.8.1.1.
Servers
10.8.1.2.
Authentication keys
10.9.
DNS
❱
10.9.1.
DNS servers
10.9.2.
Search domains
10.9.3.
Hostnames
10.10.
Notification
❱
10.10.1.
Email (SMTP)
❱
10.10.1.1.
Send Test email
10.10.2.
SNMP Trap Receivers
❱
10.10.2.1.
Trap User
10.11.
Advanced settings
11.
Gearlinx ZERO
❱
11.1.
Synchronization information
❱
11.1.1.
Device
11.1.2.
Organization
11.1.3.
Configuration
11.2.
Firmware update
❱
11.2.1.
Download
❱
11.2.1.1.
Download progress
11.2.2.
Flash
11.3.
Remote access VPN
❱
11.3.1.
Tunnel addresses
11.3.2.
Peers
❱
11.3.2.1.
Routes
11.4.
Synchronize
Light
Rust
Coal
Navy
Ayu
Gearlinx Duckfone4 Software Manual (23.6.215.0)
Switch SIM slot
Switch the active SIM slot now.
The command takes no parameters.